What methods can make rubber factory industrial chillers more energy efficient

Update:26 Oct 2019
Summary:

Judging from the current sales situation of industrial […]

Judging from the current sales situation of industrial chillers, people's purchases are still relatively large. So here are some of the energy-saving methods for industrial chillers. So, what methods can make rubber plant industrial chillers more energy efficient?

 What methods can make rubber plant industrial chillers more energy efficient?

First, to reduce the condensing temperature to meet the equipment safety and production requirements, to maximize the evaporation temperature and reduce the condensation temperature, for this purpose, the cooling tower has been modified to ensure the cooling water efficiency.

The second is to use the chiller frequency conversion device to adjust the speed of the centrifugal chiller compressor. After the low pressure refrigerant passes through the centrifuge, the pressure rises. The higher the speed of the centrifuge, the higher the pressure rises. In actual operation, most of the equipment is running at a non-full load.

The third is to adjust the reasonable operating load of the industrial chiller equipment. In the case of ensuring the safe operation of the equipment, the cooling main engine runs at 70%-80% load ratio and runs at 100% load, the power consumption per unit of cooling capacity is smaller. The mode is to be combined with the operation of the pump and cooling tower.

The fourth is to prevent and reduce pipe fouling to improve the heat exchange efficiency of the condenser and the evaporator. If the water treatment is not good, the calcium carbonate and magnesium carbonate heated by the calcium bicarbonate and magnesium bicarbonate will be deposited in the pipeline. on. Decreasing the thermal conductivity, affecting the heat exchange efficiency of the condenser and the evaporator, and greatly increasing the electricity cost of the equipment.

https://www.chinacoldroom.com/