What is the reason for the power consumption of the col […]
What is the reason for the power consumption of the cold storage? How to reduce the power consumption of cold storage
How can the construction of cold storage save electricity? After the cold storage is built, the power consumption of the cold storage is often increased due to incorrect use. The unreasonable design of the early cold storage can easily lead to the power consumption of the cold storage. So how can the cold storage be more energy-saving and correct operation to reduce the later electricity cost Woolen cloth? Here are a few simple ways
1. First of all, let’s analyze what factors will increase the power consumption of the cold storage:
A. The early design of the cold storage leads to the power consumption of the cold storage-the design of the refrigerant connection pipe is too long, the cooling configuration of the unit does not meet the requirements, the thickness of the plate does not meet the standard, the low-temperature cold storage does not use aluminum row type, the external machine and the internal machine do not match, Circumstances such as the use of 220v electricity in the cold storage will lead to an increase in power consumption.
B. Incorrect use in the later period leads to the power consumption of the cold storage-the goods are not pre-cooled before the goods are brought into the warehouse, the doors are often opened and closed without air curtains, the goods in and out are unreasonably stacked, and the cold storage is unscheduled for maintenance, etc. It will also lead to increased power consumption in cold storage.
2. The following briefly introduces which methods can reduce power consumption and operating costs of your cold storage:
A. Reasonable design in the early stage to reduce the power consumption of the cold storage-low-temperature cold storage adopts aluminum row type to save electricity than air cooler type (not applicable to all low-temperature cold storages), and the cold storage is equipped with air curtains that frequently enter and exit the door. Each time the door is opened and closed, it can block The cold storage in the warehouse is lost. When configuring the cold storage unit, try to equip the cold storage equipment as much as possible, so that the unit will not be overloaded when there are too many goods in the warehouse. The distance between the cold storage refrigerant connecting pipe and the compressor should not exceed 10 meters. The cold storage uses 380v Electricity, etc., such methods can reduce the increase in cold storage electricity bills in the early stage of the design.
B. Use the cold storage to reduce the power consumption of the cold storage in the later stage-when using the cold storage, pay attention to the control of each incoming and outgoing goods at about 20-40% of the total amount. Turn off the lights and close the door, develop good behaviors, regularly check the sealing conditions in the cold storage, timely fill in the poorly sealed places (the gap in front of the storage board is sealed with silica gel, including the storage roof), and the unit equipment is cleaned regularly to avoid A large amount of dust is inhaled in the equipment.