The sealing of the space and the sealing effect of the […]
1. In the process of using chillers, most companies are not aware of the impact of the environment and other factors on the chiller. In order to better use the chiller equipment, it is recommended that the company be aware of the importance of environmental sealing during the operation of the chiller. Serious sealing treatment of the operating environment of the equipment can avoid serious problems such as loss of cold source during the long-term operation of the chiller. Without any loss of cold source, the cooling performance of the chiller can be comprehensively improved, thereby reducing the cost of using the chiller.
2. When sealing the chiller, you need to consider the size of the space. If the space of the equipment is relatively small, the cost of the sealed space can be appropriately reduced. As long as the outside air can be prevented from coming into contact with the internal environment of the chiller, the chiller can be quickly reduced in space. The higher the temperature efficiency of a company using a chiller to reduce space, the lower the cost of using a chiller.
3. Once the chiller has problems such as sealing leakage, it is not conducive to the long-term use of the chiller. In order to better operate the chiller and reduce the energy consumption of the equipment to reduce the space temperature, the company needs to regularly check the sealing effect of the operating environment and the sealing effect of the equipment itself. The better the sealing effect, the higher the safety factor of the company using the chiller, and the cost of the chiller will not increase due to the problem of the seal.
Enterprises using chillers must be aware of the importance of good or bad sealing. If the operating space of the enterprise is poorly sealed, the cooling performance of the chiller will inevitably be seriously affected. Even the longer the enterprise runs the chiller, the increasing proportion of energy consumption will seriously affect the normal use of the chiller.